Gap Turbos

Turbo Fitting Birmingham — Professional Fit, 24-Month Warranty

// Turbo Fitting — Birmingham workshop, full warranty

Professional Turbocharger Fitting at Our Birmingham Workshop

We do not just ship turbos, we fit them. Oil flush, gasket replacement, priming, first-start procedure. Full 24-month fitted warranty when the turbo is fitted by us.

🛢

01

Old turbo failed = contaminated oil. We change it.

Oil change first

🔩

02

Every fit includes new gaskets, copper washers, oil feed banjo.

New gaskets & banjo

⚙

03

Bearings primed with oil before first crank. Saves the rebuild.

Priming & first-start

🛡

04

24 months parts & labour when we fit it on-site.

Fitted warranty

// Why fitting matters

Half of all failed turbos die from how they were fitted, not how they were built.

Oil starvation in the first 30 seconds kills more reconditioned turbos than any other cause. Old contaminated oil from the failed turbo carries metal fragments straight into the new bearings. We change oil and filter, flush the feed line, prime the bearings, and run a controlled first-start every time.

  • ✓Oil and filter change with the correct grade
  • ✓Oil feed pipe inspect and flush (replace if blocked)
  • ✓Oil feed banjo bolt and gauze filter inspect
  • ✓Intercooler and intake pipe flush
  • ✓Bearing prime with engine oil before crank
  • ✓Idle-only first-start, monitored for 5 minutes
Half of all failed turbos die from how they were fitted, not how they were built.

// Our Fitting Procedure

How a turbo fitting works at Gap

Allow half a day. We provide a courtesy car for collect-and-return on Birmingham postcodes.

1

Drop off

Bring the vehicle to B30 2NH. We confirm symptoms and book in.

2

Remove & inspect

Old turbo off, intake checked for ingested metal, oil feed line flushed.

3

Fit & prime

New gaskets, banjo, oil change. Bearings primed with oil before reconnecting feed.

4

First-start & road-test

Controlled 5-minute idle, then road-test for boost behaviour. Hand back.

Gap Turbos workshop

Fit it once, fit it right, drive it for 100,000 miles.

We fit several reconditioned turbos every week at our Birmingham workshop. The fitting procedure is what protects the rebuild and the warranty alike.

Call us today: 0121 459 8170

// Fitting FAQs

Turbo fitting: common questions

Do I need to bring the vehicle, or can you arrange collection?
Both work. We offer free collect-and-return on Birmingham postcodes (B1-B98). Outside Birmingham, our partner courier handles it (charged at cost).
How long does fitting take?
Half a working day for most diesel cars. Vans and 4x4s where the turbo is buried can be a full day. We confirm an exact time when you book.
Does the fitted warranty cover towing?
Yes. If a Gap-fitted turbo fails within warranty, we cover recovery to our workshop plus replacement plus refit, no excess.
Will fitting damage my engine warranty?
No. We use OEM-spec gaskets and follow the manufacturer fitting sequence. Engine warranty (if you have one) remains intact.
Can I buy a turbo from elsewhere and have you fit it?
Yes, but only if the turbo arrives boxed and untampered. We test it before fitting. Warranty on the part itself sits with the supplier, not us; our fitted labour warranty is 12 months.

Book a fitting slot in Birmingham.

Same-day slots often available for repairs. Bring the vehicle in or send it via courier.